|
| News |
 |
|
|
 |
|
|
|
 |
Company News |
|
Your current position£ºNews |
|
 |
| Precautions for installing fan lights, these common knowledge you need to know |
1¡¢ Choose the appropriate location
Before installing the fan light, it is necessary to choose a suitable location. Generally speaking, fan lights should be installed in the center of the room so that they can fan to every corner and achieve the best effect. At the same time, it is important to choose a location that is relatively close to the power outlet in order to avoid safety hazards during the wire pulling process.
2¡¢ Confirm the occurrence of lifting
Usually, when decorating a room, a ceiling is nailed up, but some rooms may not have a ceiling or the ceiling may not be strong enough. Before installing the fan light, it is necessary to confirm whether the lifting is present, and also check whether the suspension rod of the ceiling fan light is in contact with the ceiling, so as to ensure that the ceiling fan light will not shake or tilt.
3¡¢ Pay attention to the power load
The power of fan lights is higher than that of ordinary lights, which can have an impact on the electrical load. Before installing the fan light, it is necessary to confirm whether the room's circuit can withstand the load of the ceiling fan light. If the circuit in the room cannot withstand it, additional power protectors need to be installed or the carrying capacity of the circuit needs to be enhanced to avoid circuit overload problems.
4¡¢ Pay attention to safety during the installation process
Installing fan lights requires climbing up a ladder, and extra caution must be taken during operation to avoid slipping or falling due to unstable ladders or imbalanced body weight. At the same time, tools that meet safety standards should be used to avoid problems.
5¡¢ Connect the wires properly
When installing the fan light, it is necessary to connect the wires correctly and ensure that the wires are firmly and reliably connected. If you have no installation experience, you can hire a professional electrician to install it to avoid problems such as incorrect circuit connections or safety hazards.
|
|
 |
|
|
|
